Arcadyan VGV7510KW22 (o2 Box 6431)/Sysinfo

From Random Projects
Revision as of 11:28, 16 December 2016 by Uwe Hermann (talk | contribs) (Bootlog)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

System Info (vendor firmware)

Bootlog

 ROM VER: 1.
 ROM VER: 1.1.4
 CFG 01
 Tuning DDR begin
 DDR Access auto data-eye tuning Rev 0.3a
 DDR size from 0xa0000000 - 0xa3ffffff
 DDR check ok... start booting...
 
 
 
 
 =======================================================================
 Wireless VDSL Gateway VR9 Loader V1.08.02 build Mar 12 2014 14:36:06
                     Arcadyan Technology Corporation
 =======================================================================
 MXIC MX29GL128EL top boot 16-bit mode found
 
 Copying boot params.....DONE
 
 
 Press Space Bar 3 times to enter command mode ...
 Flash Checking [0] Passed.
 Image[1] at 0xb00e0000, len:2256500, type:0
 Image[2] at 0xb0307000, len:163117, type:10
 Image[3] at 0xb032f000, len:218399, type:11
 Image[4] at 0xb0364800, len:234402, type:12
 Image[5] at 0xb039dc00, len:405875, type:60
 Image[6] at 0xb0401000, len:387052, type:90
 Firmware image at 0, ART image at -1
 
 Run-up ART Firmware... Fail
 Back to run-up Normal Firmware...
 
 Unzipping firmware [0(5)] at 0x80002000 ... [ZIP 3] [ZIP 1]  done
 Run-time code running ...
 
 In c_entry() function ...
 install_exception 
 Co config = 80048483
 sys_irq_init ...
 VR9 is A21 chip !!!!, ifx_bsp_basic_mps_decrypt bf001f38
 0xbf106a10 : 78
 0xbf106a11 : 0
 0xbf106a0c : 88
 ##### _ftext      = 0x80002000
 ##### _fdata      = 0x808DD770
 ##### __bss_start = 0x8098FE94
 ##### end         = 0x83B3F1E0
 allocate_memory_after_end> len 730916, ptr 0x83b471e0
 ##### Backup Data from 0x808DD770 to 0x83B471E0~0x83BF9904 len 730916
 ##### Backup Data completed
 ##### Backup Data verified
 [GPIO FLOW] SetGpio() Begin ..
 
 Test USB Power ON!!
 ************************ LED all ON
 led_all_on> 0
 ************************ LED all OFF
 [GPIO FLOW] SetGpio() End.
 [INIT] System Log Pool startup ...
 [INIT] MTinitialize ..
 CPU Clock 500000000 Hz
 mips_counter_frequency:250000000
 r4k_offset: 0x0003d090(250000)
 init_US_counter : time1 = 57 , time2 = 200095, diff 200038
 US_counter = 125
 set to constant US_counter = 112
  cnt1 2040019 cnt2 2042856, diff 2837
  cnt1 2886394 cnt2 2888194, diff 1800
 Runtime code version: 1.01.28
 System startup...
 [INIT] Memory COLOR 0, 4048576 bytes ..
 [INIT] Memory COLOR 1, 524288 bytes ..
 [INIT] Memory COLOR 2, 8759456 bytes ..
 
 rzMemory start: 0x81CFAE3C, end 0x81E5A63C, size 1439744InitCommSys: RESOURCE_BASE = 129, NUMRES = 640
 InitCommSys: EVENT_BASE = 336, NUMEVT = 818
 InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64
 MXIC MX29GL128EL bottom boot 16-bit mode found
 Set flash memory layout to Boot Parameters found !!!
 Bootcode version: V1.08.02
 Serial number: NSERIALNRN
 Hardware version: 01
 Jul 21 2016 19:49:51
 [BUILD:PIN] PIN:NSERIALNRN, MAC:00MACADDR00
 [BUILD-PIN]: PIN:PINPINPI, len=8
 MXIC MX29GL128EL bottom boot 16-bit mode found
 MXIC MX29GL128EL bottom boot 16-bit mode found
 decode_config> remain buffer len=4904848
 decomp_buf2buf_impl> buffer size *M=4904848
 Decompression ratio = 9.8
 Signature matched at offset 360276
 Add-on new config tail> oldSize:360320, oldCfgSize:13230, adjust length to -1
 [CONFIG] read_config_from_flash ret=0
 
 my CFGVersionMagic = 33343536, old CFGVersionMagic on flash = 33343536
 my CFGsize = 360320, my CFGDescSize = 41235
 my Version = 1.01.28, Version on flash= 1.01.28
 [CONFIG] old cfg version:[1.01.28], [1.1.28.100.4.0]
 source CFGsize = 360320, CFGDescSize = 41235
 (oldCfg) Warning! nLen, 401555 > cfg_src_size, 373550
 OldCfgHexSize:13222
 Unzipping from 8159A94C to 81590828 ... [ZIP 2] allocate_memory_after_end> len 81516, ptr 0x83bf9920
 done
 Uncompressed size = 41233
 Tail1 : END_III_Config_t
 
 Size of Old CFG_DESC is :41233!!!
 useCfgDesc:1
 MyCfgHexSize:13222
 Unzipping from 8158D468 to 81583344 ... [ZIP 2] done
 Uncompressed size = 41233
 My CFGDescSize:41235
 useCfgDesc:1
 Tail : END_III_Config_t
 
 useCfgDesc:3
 
 Restore Config file from ver:1.01.28!!!
 
 [CONFIG] DS_Tail:[t_ARV752DPW]
 [CONFIG] load_config ret=1
 [updateConfig] flash version:[1.01.28], [1.1.28.100]
 [updateConfig] code version:[1.01.28], [1.1.28.100]
 check_WAN_switch returns -1
 default route: 0.0.0.0
 [CheckUSBBackConf]Erase the garbage config in usbBackConf_s
 BufferInit:
 BUF_HDR_SZ=192 BUF_ALIGN_SZ=16 BUFFER_OFFSET=448
 BUF_BUFSZ0=576 BUF_BUFSZ1=4352
 NUM_OF_B0=0 NUM_OF_B1=2400
 BUF_POOL0_SZ=0 BUF_POOL1_SZ=10905600
 sizeof(BUFFER0)=768,sizeof(BUFFER1)=4544
 *BUF0=0x829524f8 *BUF1=0x81eebcd8
 Altgn *BUF0=0x82952500 *BUF1=0x81eebce0
 End at BUF0:0x82952500, BUF1:0x829524e0
 
 BUF0[0]=0x82952500 BUF1[0]=0x81eebce0
 
 buffer0 pointer init OK!
 buffer1 pointer init OK!
 [qm_lnk_init] CLOCKHZ=1000 ...
 CLOCKHZ=1000
 gConfig.Interface[0].IP_Addr = 127.0.0.1
 gConfig.Interface[0].Subnet_Mask = 255.255.255.255
 gConfig.Interface[0].Description = LOCAL_LOOPBACK
 ***** [iput_IpLinkUp] ifno=0, link_type:12
 TRAP(linkUp) : send ok!
 Interface 0 ip = 127.0.0.1
 
 gConfig.Interface[1].IP_Addr = 192.168.1.1
 gConfig.Interface[1].Subnet_Mask = 255.255.255.0
 gConfig.Interface[1].Description = LAN
 [mac_0_init] ifno=1, vlan=0, vid=1, port_mask=0xf, mac_0_initialized=0
 [KERN_INFO]IFX PMU driver, version 1.0.5, (c)2009 Infineon Technologies AG
 ifx_dma_init_module : 
 ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 5 regid 0 regbit 5
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module DMA has been activated 1 times before
 [map_dma_chan 1576]: dma_chan[0] request_irq 64
 IrqConnect : IRQ = 64, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[1] request_irq 65
 IrqConnect : IRQ = 65, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[2] request_irq 66
 IrqConnect : IRQ = 66, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[3] request_irq 67
 IrqConnect : IRQ = 67, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[4] request_irq 68
 IrqConnect : IRQ = 68, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[5] request_irq 69
 IrqConnect : IRQ = 69, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[6] request_irq 70
 IrqConnect : IRQ = 70, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[7] request_irq 71
 IrqConnect : IRQ = 71, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[8] request_irq 72
 IrqConnect : IRQ = 72, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[9] request_irq 73
 IrqConnect : IRQ = 73, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[10] request_irq 74
 IrqConnect : IRQ = 74, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[11] request_irq 75
 IrqConnect : IRQ = 75, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[12] request_irq 89
 IrqConnect : IRQ = 89, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[13] request_irq 90
 IrqConnect : IRQ = 90, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[14] request_irq 91
 IrqConnect : IRQ = 91, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[15] request_irq 92
 IrqConnect : IRQ = 92, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[16] request_irq 93
 IrqConnect : IRQ = 93, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[17] request_irq 62
 IrqConnect : IRQ = 62, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[18] request_irq 80
 IrqConnect : IRQ = 80, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[19] request_irq 85
 IrqConnect : IRQ = 85, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[20] request_irq 128
 IrqConnect : IRQ = 128, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[21] request_irq 129
 IrqConnect : IRQ = 129, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[22] request_irq 130
 IrqConnect : IRQ = 130, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[23] request_irq 131
 IrqConnect : IRQ = 131, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[24] request_irq 132
 IrqConnect : IRQ = 132, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[25] request_irq 133
 IrqConnect : IRQ = 133, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[26] request_irq 134
 IrqConnect : IRQ = 134, Handler = 0x804548E8
 [map_dma_chan 1576]: dma_chan[27] request_irq 135
 IrqConnect : IRQ = 135, Handler = 0x804548E8
 ifx_dma_init_module : g_desc_list 80da47c0
 [KERN_INFO]IFX DMA driver, version ifxmips_dma_core.c:v1.0.4 
 ,(c)2009 Infineon Technologies AG
 ifx_gpio_init() !!!
 ifx_gpio_pre_init() !!!
 [KERN_INFO]IFX GPIO driver, version 1.2.10, (c)2009 Infineon Technologies AG
 [KERN_INFO]Infineon Technologies RCU driver version 1.1.2 
 [amazon_s_eth_init] Loading A5 (MII0/1 + ATM) driver ......
 [amazon_s_eth_init] gPPE_Start_Module=0x1, gPPE_HAL_Start_Module=0x0
 
 a5 wanitf case 1 g_eth_wan_mode=0
 
 a5 final g_wan_itf=0xc0
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 9 regid 0 regbit 9
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module DSL-DFE has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 13 regid 0 regbit 13
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module AHBS has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 19 regid 0 regbit 19
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-SSL01 has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 21 regid 0 regbit 21
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-TC has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 22 regid 0 regbit 22
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-EMA has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 23 regid 0 regbit 23
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-DPLUSM has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 24 regid 0 regbit 24
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-DPLUSS has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 28 regid 0 regbit 28
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module SWITCH has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc615909f module 29 regid 0 regbit 29
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-TOP has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc611909f module 18 regid 0 regbit 18
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module PPE-QSB has been activated 1 times before
 [a5 alloc_dma] pre_alloc_desc_total_num=704, line 6185
 [turn_on_dma_rx] a5, line 4559
 [turn_on_dma_rx] a5, line 4559
 IrqConnect : IRQ = 87, Handler = 0x8047E93C
 IrqConnect : IRQ = 88, Handler = 0x8047EA44
 Succeeded!
 PPE datapath driver info:
   Version ID: 64.3.7.1.0.1.4
   Family    : VR9
   DR Type   : Normal Data Path | Indirect-Fast Path
   Interface : MII0 | MII1 | ATM
   Mode      : Routing
   Release   : 0.1.4
 PPE firmware info:
   Version ID: 7.2.4.6.1.17
   Family    : VR9
   FW Type   : Acceleration
   Interface : MII0/1 + ATM
   Mode      : Bridging + IPv4 Routing
   Release   : 1.17
 IFX SWITCH API, Version 1.1.6.7
 IFX_ETHSW_Open() !!!
 [KERN_INFO]SWAPI: Registered character device [switch_api] with major no [81]
 ifx_pmu_set: PMU_PWDCR0 = 0xc611909f module 29 regid 0 regbit 29
 ifx_pmu_set: Module PPE-TOP has been activated 2 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc611909f module 23 regid 0 regbit 23
 ifx_pmu_set: Module PPE-DPLUSM has been activated 2 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc611909f module 24 regid 0 regbit 24
 ifx_pmu_set: Module PPE-DPLUSS has been activated 2 times before
 ifx_pmu_set: PMU_PWDCR0 = 0xc611909f module 28 regid 0 regbit 28
 ifx_pmu_set: Module SWITCH has been activated 2 times before
 Switch API: PCE MicroCode loaded !!
 IFX_ETHSW_IOCTL_WrapperInit() !!!
 chip_id 2000b713 chip_id b
 Switch Auto Polling value = 0
 [KERN_ERR ] GPHY FW load for A2x !!
 vr9_gphy_gpio_init : Config GPIO3 clock !!!
 IF_CLK = 10e00008
 BSP_GPIO_P0_ALTSEL0 00002080 BSP_GPIO_P0_ALTSEL1 000000a0 0000fca4 0000fea4
 BSP_GPIO_P1_ALTSEL0 00008580 BSP_GPIO_P1_ALTSEL1 00000000 0000b1b8 0000b1b8
 BSP_GPIO_P2_ALTSEL0 00001e03 BSP_GPIO_P2_ALTSEL1 00003000 0000bb02 0000bf02
 BSP_GPHY0_Cfg 1fe70000 BSP_GPHY1_Cfg 1fe00000
 ifx_pmu_set: PMU_PWDCR0 = 0xc611909f module 28 regid 0 regbit 28
 ifx_pmu_set: Module SWITCH has been activated 3 times before
 ifx_pmu_set: PMU_PWDCR0 = 0x8611909f module 30 regid 0 regbit 30
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module GPHY has been activated 1 times before
 Switch Auto Polling value = 0
 vr9_gphy_reset() !!!
 GPHY FIRMWARE LOAD SUCCESSFULLY AT ADDR : 850000, gphy_fw_dma=0x8084b3bc
 [KERN_INFO] IFX GPHY driver FE Mode, version ifxmips_vr9_gphy: V0.9 - Firmware: c434
 
 Disable all FE ports...
 
 power-down WAN PHY
 [disable_vrx_switch_ports] sizeof(SWITCH_PORT)/sizeof(int)=5
 [disable_vrx_switch_ports] cmd_str=PortCfgSet 0 0 0 0 0 0 0 1 255 0 0
 [disable_vrx_switch_ports] cmd_str=PortCfgSet 2 0 0 0 0 0 0 1 255 0 0
 [disable_vrx_switch_ports] cmd_str=PortCfgSet 3 0 0 0 0 0 0 1 255 0 0
 [disable_vrx_switch_ports] cmd_str=PortCfgSet 4 0 0 0 0 0 0 1 255 0 0
 [disable_vrx_switch_ports] cmd_str=PortCfgSet 5 0 0 0 0 0 0 1 255 0 0
 
 VR9 1.2 CPU port flow control workaround applied!!
 	nRegAddr = 0xbe4
 	nData = 0x5102
 
 register 0xbe4 read value=0x5102
 RegisterSet 0xBE4 0x5100
 	nRegAddr = 0xcc2
 	nData = 0x1dc
 
 register 0xcc2 read value=0x01DC
 [enable_vrx_switch_ports] sizeof(SWITCH_PORT)/sizeof(int)=4
 [enable_vrx_switch_ports] cmd_str=PortCfgSet 2 1 0 0 0 0 0 0 255 0 0
 [enable_vrx_switch_ports] cmd_str=PortCfgSet 3 1 0 0 0 0 0 0 255 0 0
 [enable_vrx_switch_ports] cmd_str=PortCfgSet 4 1 0 0 0 0 0 0 255 0 0
 [enable_vrx_switch_ports] cmd_str=PortCfgSet 5 1 0 0 0 0 0 0 255 0 0
 
 power-down WAN PHY
 [switch_enable_igmp_snooping] gSetting.IGMP_Snooping=1
 Error: the prot was not in the member
 Error: the prot was not in the member
 MulticastRouterPortAdd 6
 
 ===AccessNetworkDiscovery Enabled, normal switch setup is applied===
 MAC Address: 00:de:ad:be:ef:33
 
 Enable all FE ports...
 ***** [iput_IpLinkUp] ifno=1, link_type:12
 TRAP(linkUp) : send ok!
 Interface 1 ip = 192.168.1.1
 
 gConfig.Interface[2].IP_Addr = 0.0.0.0
 gConfig.Interface[2].Subnet_Mask = 0.0.0.0
 gConfig.Interface[2].Description = WLAN
 ifx_pci_startup !!!
 [/home/users/jason_ko/hansenet_vr9/source/firmware/hardware/InfVR9_v5.1/pci/ifxmips_pci.c dump_cs 579]: Dumping b7007000
 b7007000: 35921814
 b7007004: 04300000
 b7007008: 02800000
 b700700c: 00000000
 b7007010: ffff0000
 b7007014: 00000000
 b7007018: 00000000
 b700701c: 00000000
 b7007020: 00000000
 b7007024: 00000000
 b7007028: ffffffff
 b700702c: 35921814
 b7007030: 00000000
 b7007034: 00000040
 b7007038: 00000000
 b700703c: 04020100
 b7007040: c9cb0001
 b7007044: 00000000
 b7007048: 00000000
 b700704c: 00000000
 b7007050: 00000000
 b7007054: 00000000
 b7007058: 00000000
 b700705c: 00000000
 b7007060: 00000000
 b7007064: 00000000
 b7007068: 00000000
 b700706c: 00000000
 b7007070: 00000000
 b7007074: 00000000
 b7007078: 00000000
 b700707c: 00000000
 b7007080: 00000000
 b7007084: 00000000
 b7007088: 00000000
 b700708c: 00000000
 b7007090: 00000000
 b7007094: 00000000
 b7007098: 00000000
 b700709c: 00000000
 b70070a0: 00000000
 b70070a4: 00000000
 b70070a8: 00000000
 b70070ac: 00000000
 b70070b0: 00000000
 b70070b4: 00000000
 b70070b8: 00000000
 b70070bc: 00000000
 b70070c0: 00000000
 b70070c4: 00000000
 b70070c8: 00000000
 b70070cc: 00000000
 b70070d0: 00000000
 b70070d4: 00000000
 b70070d8: 00000000
 b70070dc: 00000000
 b70070e0: 00000000
 b70070e4: 00000000
 b70070e8: 00000000
 b70070ec: 00000000
 b70070f0: 00000000
 b70070f4: 00000000
 b70070f8: 00000000
 b70070fc: 00000000
 
 Found 00:00 [1bef/0019] 000280 00
 [KERN_ERR]No hose for PCI dev 00:00.0!
 Found 00:70 [1814/3592] 000280 00
 [KERN_ERR]No hose for PCI dev 00:0e.0!
 PCI_CR_PCI_FPI_ERR_ADDR_REG = ffffffff
 PCI_CR_FCI_PCI_ERR_ADDR_REG = ffffffff
 PCI_CR_FPI_ERR_TAG_REG = 0000000f
 PCI_CR_PCI_IRR_REG = 00000000
 PCI_CR_PCI_IRA_REG = 00000000
 PCI_CR_PCI_IRM_REG = 00000000
 PCI_CR_PCI_FPI_ERR_ADDR_REG = ffffffff
 PCI_CR_FCI_PCI_ERR_ADDR_REG = ffffffff
 PCI_CR_PCI_IRR_REG = 00000000
 IrqConnect : IRQ = 49, Handler = 0x804A36C4
 PCI_irhan : ==========================================
 PCI_CR_PCI_FPI_ERR_ADDR_REG = ffffffff
 PCI_CR_FCI_PCI_ERR_ADDR_REG = ffffffff
 PCI_CR_FPI_ERR_TAG_REG = 0000000f
 PCI_CR_PCI_IRR_REG = 00000001
 PCI_CR_PCI_IRA_REG = 00000001
 PCI_CR_PCI_IRM_REG = fbffffff
 PCI_CR_PCI_FPI_ERR_ADDR_REG = ffffffff
 PCI_CR_FCI_PCI_ERR_ADDR_REG = ffffffff
 PCI_CR_PCI_IRR_REG = 00000000
 PCI_irhan : ==========================================
 PCI_CR_PCI_FPI_ERR_ADDR_REG = ffffffff
 PCI_CR_FCI_PCI_ERR_ADDR_REG = ffffffff
 PCI_CR_FPI_ERR_TAG_REG = 0000000f
 PCI_CR_PCI_IRR_REG = 00000000
 PCI_CR_PCI_IRA_REG = 00000000
 PCI_CR_PCI_IRM_REG = fbffffff
 PCI_CR_PCI_FPI_ERR_ADDR_REG = ffffffff
 PCI_CR_FCI_PCI_ERR_ADDR_REG = ffffffff
 PCI_CR_PCI_IRR_REG = 00000000
 setPCI_int : PCI_CR_PCI_IRR_REG = 00000000
 setPCI_int : PCI_CR_PCI_IRM_REG = fbffffff
 [KERN_INFO]IFX PCI host controller driver, version 1.1.3, (c)2009 Infineon Technologies AG
 [HWLAN] ifno=2 irno=7 port=0x00000000
 ===> rt2860_probe
 --> RTMPAllocAdapterBlock
 RTMP_ADAPTER_mem : 80c660e8, sizeof(RTMP_ADAPTER) 503056
 
 
 === pAd = FFFFFFFF80C660E8, size = 503056 ===
 
 <-- RTMPAllocAdapterBlock, Status=0
 pAd->CSRBaseAddress =0xffffffffb8000000
 AP Driver version-2.2.5.0
 NVM is EEPROM
 Allocate a net device with private data size=0!
 RtmpOSNetDevAttach()--->
 <---RtmpOSNetDevAttach(), ret=0
 <=== rt2860_probe
 ***** [iput_IpLinkUp] ifno=2, link_type:12
 TRAP(linkUp) : send ok!
 Interface 2 ip = 192.168.1.1
 
 gConfig.Interface[3].IP_Addr = 0.0.0.0
 gConfig.Interface[3].Subnet_Mask = 0.0.0.0
 gConfig.Interface[3].Description = PTM1
 VCC entry 1 is not active!!
 Interface 3 ip = 0.0.0.0
 
 gConfig.Interface[4].IP_Addr = 0.0.0.0
 gConfig.Interface[4].Subnet_Mask = 0.0.0.0
 gConfig.Interface[4].Description = PTM2
 [sar_0_init] ifno=4, T_WAN_INT=3, sar_init=0, g_atm_priv_data.max_connections=15
 ATM_UBR
 [ppe_open] g_atm_priv_data.connection_table=0
 [turn_on_dma_rx] a5, line 4559
 [ppe_open] (1.32): conn = 0, f_enable_irq=1
 [sar_0_init] index=0, ifno=4, f_llc=1
 [mpoa_setup] mpoa_type=0, f_llc=1
 [sar_0_init] Init SAR ifno:4 g_atm_vcc[0] CONN:0 VPI/VCI:1/32 PORT:0
 [sar_0_init] sar ifno: 4, flag: 0x00000200, up, sar_init=1
 SAR ifno=4, mac_inc=3, cmpaddr Address: 00:de:ad:be:ef:33
 SAR ifno=4 MAC Address: 00:de:ad:be:ef:33
 This vid exists
 IOCTL failed for ioctl command 0x40084512, returned -1
 WARNING: (MAC Address search Not Found) /home/users/jason_ko/hansenet_vr9/source/firmware/hardware/InfVR9_v5.1/switch_core/v5.1/switch_api/ifx_ethsw_flow_api.c:IFX_FLOW_MAC_TableEntryRemove:1359 
 Interface 4 ip = 0.0.0.0
 
 gConfig.Interface[11].IP_Addr = 0.0.0.0
 gConfig.Interface[11].Subnet_Mask = 0.0.0.0
 gConfig.Interface[11].Description = PPPoE1
 IFLNK_PPPOE init : (Linkp)ifno = 11 idx = 2
 IFLNK_PPPOE init : (Driverp)ifno = 11 idx = 4
 [0] Allocate resource 129, FreeResource = 1
 Allocate ppp mutex (129,0,0) for IF 11 (PPPoE1)
 
 pppInit> set (PPPShutdownRequest[ifno] = 0)
 [change_phase] start to release the allocated memory in if_table[0].ppp_p->state
 [pppoe_init]
 Interface 11 ip = 0.0.0.0
 
 gConfig.Interface[12].IP_Addr = 0.0.0.0
 gConfig.Interface[12].Subnet_Mask = 0.0.0.0
 gConfig.Interface[12].Description = PPPoE2
 IFLNK_PPPOE init : (Linkp)ifno = 12 idx = 2
 IFLNK_PPPOE init : (Driverp)ifno = 12 idx = 4
 [0] Allocate resource 130, FreeResource = 2
 Allocate ppp mutex (130,0,0) for IF 12 (PPPoE2)
 
 pppInit> set (PPPShutdownRequest[ifno] = 0)
 [change_phase] start to release the allocated memory in if_table[0].ppp_p->state
 [pppoe_init]
 [PPPoE]gInitOk==1 , So Not Do pppoe_init
 Interface 12 ip = 0.0.0.0
 
 gConfig.Interface[20].IP_Addr = 0.0.0.0
 gConfig.Interface[20].Subnet_Mask = 0.0.0.0
 gConfig.Interface[20].Description = WDS1
 [HWLAN] ifno=20 irno=7 port=0x00000000
 ***** [iput_IpLinkUp] ifno=20, link_type:12
 TRAP(linkUp) : send ok!
 Interface 20 ip = 192.168.1.1
 
 gConfig.Interface[21].IP_Addr = 0.0.0.0
 gConfig.Interface[21].Subnet_Mask = 0.0.0.0
 gConfig.Interface[21].Description = WDS2
 [HWLAN] ifno=21 irno=7 port=0x00000000
 ***** [iput_IpLinkUp] ifno=21, link_type:12
 TRAP(linkUp) : send ok!
 Interface 21 ip = 192.168.1.1
 
 gConfig.Interface[22].IP_Addr = 0.0.0.0
 gConfig.Interface[22].Subnet_Mask = 0.0.0.0
 gConfig.Interface[22].Description = WDS3
 [HWLAN] ifno=22 irno=7 port=0x00000000
 ***** [iput_IpLinkUp] ifno=22, link_type:12
 TRAP(linkUp) : send ok!
 Interface 22 ip = 192.168.1.1
 
 gConfig.Interface[23].IP_Addr = 0.0.0.0
 gConfig.Interface[23].Subnet_Mask = 0.0.0.0
 gConfig.Interface[23].Description = WDS4
 [HWLAN] ifno=23 irno=7 port=0x00000000
 ***** [iput_IpLinkUp] ifno=23, link_type:12
 TRAP(linkUp) : send ok!
 Interface 23 ip = 192.168.1.1
 
 ruleCheck()> Group: 0,  Error: Useless rule index will be truncated, from idx:1
 ruleCheck()> Group: 1,  Error: Useless rule index will be truncated, from idx:22
 ruleCheck()> Group: 2,  Error: Useless rule index will be truncated, from idx:0
 CBAC rule format check succeed !!
 reqCBACBuf()> init match pool, Have: 1000
 Memory Address: 0xffffffff83ad0904 ~ 0xffffffff83ad7680
 reqCBACBuf()> init timeGap pool, Have: 10000
 Memory Address: 0xffffffff83ad7680 ~ 0xffffffff83b083d4
 reqCBACBuf()> init sameHost pool, Have: 2000
 Memory Address: 0xffffffff83b083d4 ~ 0xffffffff83b17df4
 CBAC rule pool initialized !!
 [init_if] local_if_mask=0xf80007
 [init_if] local_wiredif_mask=0x80002
 [init_if] local_wirelessif_mask=0xf00004
 [init_if] localorVPN_if_mask=0xf80007
 [nd_InitNDResp] The first RandAdvInterval[0] = 270 seconds.
 [nd_InitNDResp] The first RandAdvInterval[1] = 405 seconds.
 [nd_InitNDResp] The first RandAdvInterval[2] = 598 seconds.
 [nd_InitNDResp] The first RandAdvInterval[3] = 540 seconds.
 [nd_InitNDResp] The first RandAdvInterval[4] = 447 seconds.
 [nd_InitNDResp] The first RandAdvInterval[5] = 531 seconds.
 [nd_InitNDResp] The first RandAdvInterval[6] = 275 seconds.
 [nd_InitNDResp] The first RandAdvInterval[7] = 515 seconds.
 [nd_InitNDResp] The first RandAdvInterval[8] = 441 seconds.
 [nd_InitNDResp] The first RandAdvInterval[9] = 473 seconds.
 [nd_InitNDResp] The first RandAdvInterval[10] = 503 seconds.
 [nd_InitNDResp] The first RandAdvInterval[11] = 234 seconds.
 [nd_InitNDResp] The first RandAdvInterval[12] = 559 seconds.
 [nd_InitNDResp] The first RandAdvInterval[13] = 387 seconds.
 [nd_InitNDResp] The first RandAdvInterval[14] = 455 seconds.
 [nd_InitNDResp] The first RandAdvInterval[15] = 492 seconds.
 [nd_InitNDResp] The first RandAdvInterval[16] = 492 seconds.
 [nd_InitNDResp] The first RandAdvInterval[17] = 299 seconds.
 [nd_InitNDResp] The first RandAdvInterval[18] = 270 seconds.
 [nd_InitNDResp] The first RandAdvInterval[19] = 328 seconds.
 [nd_InitNDResp] The first RandAdvInterval[20] = 301 seconds.
 [nd_InitNDResp] The first RandAdvInterval[21] = 358 seconds.
 [nd_InitNDResp] The first RandAdvInterval[22] = 480 seconds.
 [nd_InitNDResp] The first RandAdvInterval[23] = 335 seconds.
 [nd_InitNDResp] The first RandAdvInterval[24] = 322 seconds.
 [nd_InitNDResp] do nd_RegisterHandler()...
 [ndevt_RegisterHandler] insert_enlist_entry()...
 [ndevt_RegisterHandler] insert_enlist_entry()...
 [ndevt_RegisterHandler] insert_enlist_entry()...
 [ndevt_RegisterHandler] insert_enlist_entry()...
 [v6tunnel_init] enable=0
 [init_connv6] init complete
 Init NAT data structure
 RUNTASK id=2 if_task if0...
 RUNTASK id=3 if_task if1...
 RUNTASK id=4 if_task if2...
 RUNTASK id=5 if_task if3...
 RUNTASK id=6 if_task if4...
 RUNTASK id=7 if_task if20...
 RUNTASK id=8 if_task if21...
 RUNTASK id=9 if_task if22...
 RUNTASK id=10 if_task if23...
 RUNTASK id=11 timer_task...
 RUNTASK id=12 conn_mgr...
 RUNTASK id=13 main_8021x...
 Build Day = Jul 21 2016
 RUNTASK id=14 saveRandomSeedTask...
 [VFS_init] Start...
 [VFS_init] vfsState:1
 vfs_codepage_init() TimeZone:23, vfs_cp_idx:23, vfs_cp_ID:5
 fat_codePageInit() TimeZone:23, codePage:CP850, cPID:5, cpSize:256, toUpSize:30
 ntfs_codepage timezone:23, lan= 0
 ntfs_codePageInit() TimeZone:23, codePage:5
 ==[vfs_register_filesystem]============================
 list size:1,  Method:0x808e1ac4
   1) Type:0xfc, Name:BRN-VFS
 =================================================================
 [VFS_init] VFS ROOT FS init OK
 ==[vfs_register_filesystem]============================
 list size:7,  Method:0x808e1d04
   1) Type:0x01, Name:FAT12
   2) Type:0x04, Name:FAT16
   3) Type:0x06, Name:FAT16
   4) Type:0x0b, Name:FAT32
   5) Type:0x0c, Name:FAT32
   6) Type:0x0e, Name:FAT16
   7) Type:0x81, Name:Minix
 =================================================================
 [VFS_init] FAT init OK
 ==[vfs_register_filesystem]============================
 list size:1,  Method:0x808e28d8
   1) Type:0x07, Name:NTFS/HPFS
 =================================================================
 [VFS_init] NTFS init OK
 [VFS_init]-[vfs_mount_root] Start...
 [VFS_init]-[vfs_mount_root] Init <root> OK...
 [VFS_init]-[vfs_mount_root] Init <dev> OK...
 [VFS_init]-[vfs_mount_root] Init <mnt> OK...
 [0-START]=========================================
   Node 000-[\],  DIR, MountFlag:0x00
 [0-END]===========================================
   [1-START]=========================================
     Node 001-[dev],  DIR, MountFlag:0x00
   [1-END]===========================================
   [1-START]=========================================
     Node 002-[mnt],  DIR, MountFlag:0x00
   [1-END]===========================================
 dump_inode() freeCnt:77, usedCnt:3
 [USB-INIT] main() ====== call UsbSysInit() ... 
 [USB-INIT] main() ====== after call UsbSysInit() 
 RUNTASK id=17 period_task...
 
 ========== ADSL Modem initialization OK ! ======
 
 [Dhcpd_Start]
 RUNTASK id=18 dhcp_daemon...
 RUNTASK id=19 ssh_telnetd_main...
 main()> usb:1, ftp:1
 RUNTASK id=20 ftpd_main...
 Primary image: 0, flash area 5
 found signature: 78h 56h 34h 12h
 ulImgLens=2256500, LENGTH[5]-12=7864308, type:0
 length checking OK
 [0]2 find End at 0xFFFFFFFFB0306C00 len=2256500, type=0
 found signature: 78h 56h 34h 12h
 ulImgLens=163117, LENGTH[5]-12=7864308, type:10
 length checking OK
 [1]2 find End at 0xFFFFFFFFB032EC00 len=163117, type=10
 found signature: 78h 56h 34h 12h
 ulImgLens=218399, LENGTH[5]-12=7864308, type:11
 length checking OK
 [2]2 find End at 0xFFFFFFFFB0364400 len=218399, type=11
 found signature: 78h 56h 34h 12h
 ulImgLens=234402, LENGTH[5]-12=7864308, type:12
 length checking OK
 [3]2 find End at 0xFFFFFFFFB039D800 len=234402, type=12
 ---[ LZMA head start in 0xFFFFFFFFB039DC00 ]---
 found signature: 78h 56h 34h 12h
 ulImgLens=405875, LENGTH[5]-12=7864308, type:60
 length checking OK
 [4]2 find End at 0xFFFFFFFFB0400C00 len=405875, type=60
 ---[ LZMA head start in 0xFFFFFFFFB0401000 ]---
 found signature: 78h 56h 34h 12h
 ulImgLens=387052, LENGTH[5]-12=7864308, type:90
 length checking OK
 [5]2 find End at 0xFFFFFFFFB045F800 len=387052, type=90
 Image[1] at 0xB00E0000, len=2256500, type=0
 Image[2] at 0xB0307000, len=163117, type=10
 Image[3] at 0xB032F000, len=218399, type=11
 Image[4] at 0xB0364800, len=234402, type=12
 Image[5] at 0xB039DC00, len=405875, type=60
 Image[6] at 0xB0401000, len=387052, type=90
 [get_web_address] Web-0:  addr:0xb0307000, len:163117, type:10
 [get_web_address] Web-1:  addr:0xb032f000, len:218399, type:11
 [get_web_address] Web-2:  addr:0xb0364800, len:234402, type:12
 getUnZipFileLength: [ZIP 3]
 getUnZipFileLength: [ZIP 1]
 Unzipping from B0307000 to 83E9F800 ... [ZIP 3] [ZIP 2] done
 Uncompressed size = 328752
 getUnZipFileLength: [ZIP 3]
 getUnZipFileLength: [ZIP 1]
 [absread] flash_init: pfs image found at ffffffffb032f000, size is 1193531 bytes
 Unzipping from B032F000 to 83D7BE00 ... [ZIP 3] [ZIP 2] done
 Uncompressed size = 1193531
 ht_ListenPort_add2 (192.168.1.1, 80, 0) Success
 RUNTASK httpd...
 RUNTASK id=23 dnsproxy...
 startNBIOSTask()...
 RUNTASK id=24 nbios_main...
 RUNTASK id=25 padmin_task_entry...
 RUNTASK id=26 dhcpd_mgmt_task...
 UPnP task run-up... upnpFunc:1
 UPNP Device initialize success! slot=27
 update_device_OUI: OUI_str=1883BF
 [0] Allocate mailbox 6
 [0] Allocate mailbox 7
 FirstUseDate:2016-06-20T09:46:34
 WPS_Main.....................................
 RUNTASK id=30 wscmain...
 RUNTASK id=31 wsc_Send_eap_packet...
 RUNTASK id=32 wsc_Send_UPNP_packet...
 RUNTASK id=33 WSC_WaitUserAction_Task...
 UART RX Input
 RUNTASK id=34 xdsl_mgmt_task...
 [0] Allocate resource 131, FreeResource = 3
 ifx_pmu_set: PMU_PWDCR0 = 0x8611909f module 8 regid 0 regbit 8
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module SPI has been activated 1 times before
 [KERN_INFO]IFX SSC driver, version 2.1.3, (c)2009 Infineon Technologies AG
 
 call ifx_ssc_init() = 0
 ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 12 regid 0 regbit 12
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module GPTC has been activated 1 times before
 [KERN_INFO]gptu: totally 6 16-bit timers/counters
 IrqConnect : IRQ = 118, Handler = 0x804564B0
 [KERN_INFO]gptu: succeeded to request irq 118
 IrqConnect : IRQ = 119, Handler = 0x804564B0
 [KERN_INFO]gptu: succeeded to request irq 119
 IrqConnect : IRQ = 120, Handler = 0x804564B0
 [KERN_INFO]gptu: succeeded to request irq 120
 IrqConnect : IRQ = 121, Handler = 0x804564B0
 [KERN_INFO]gptu: succeeded to request irq 121
 IrqConnect : IRQ = 122, Handler = 0x804564B0
 [KERN_INFO]gptu: succeeded to request irq 122
 IrqConnect : IRQ = 123, Handler = 0x804564B0
 [KERN_INFO]gptu: succeeded to request irq 123
  do_div error ???
 [KERN_INFO]ifx_gptu_timer_set(4, 16000), divider = 15625000
 request_timer(4, 0x0000010D, 15625000)
 [KERN_INFO]request_timer(4, 0x0000010D, 15625000)...ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 12 regid 0 regbit 12
 ifx_pmu_set: Module GPTC has been activated 2 times before
 successful!
 Init timer (4) - OK
 RUNTASK id=36 apAppInit...
 [setNextBBIDisconnectTime]: Enter!! type = 0
 [setNextBBIDisconnectTime]: Old next disconnect time to 03:00
 [setNextBBIDisconnectTime]: Update next disconnect time to 03:59
 RUNTASK id=39 pppFailBackPeriodCheckTask()...
 RUNTASK id=40 pid_cc_err_stats_task...
 Access Network Discovery mechanism is disabled!
 RUNTASK id=41 autoWanDetectTask...
 Starting Multitask...
 [USB] UsbSPoolArray: 80DAE1C0H ~ 80EAEFBF, UsbSPool:80DAE1E0
 [USB] UsbMPoolArray: 80EAEFC0H ~ 80EB0EDF, UsbMPool:80EAEFE0
 [USB] UsbLPoolArray: 80EB0EE0H ~ 80F08EFF, UsbLPool:80EB0F00
 [USB] Small  Un-Cached Memory(5977): 80DAE1E0 ~ 80EAEF0F
 [USB] Medium Un-Cached Memory(30): 80EAEFE0 ~ 80EB0DDF
 [USB] Large  Un-Cached Memory(21): 80EB0F00 ~ 80F04EFF
 setUsbPciInfo() cpu_to_usb_addr_shift[3]:0x00000000, usb_to_cpu_addr_shift[3]:0x00000000
 usb_pci_probe() Found Synopsis OTG-1, baseAddr:0xbe101000
 setUsbPciInfo() cpu_to_usb_addr_shift[4]:0x00000000, usb_to_cpu_addr_shift[4]:0x00000000
 usb_pci_probe() Found Synopsis OTG-2, baseAddr:0xbe106000
 [ipv6_autocfg_task] If(1)
 [ipv6_autocfg_task] If(1) ready
 [ipv6_setup_interface] ifno=1, if_table[1].ipv6_UnicastAddr=0x0, if_table[1].ipv6_MulticastAddr=0x8312b180
 usb_power_set() Previous power off:0, current time:71
 usb_power_set(1) min time delay:6000, current delay:71
 usb_power_set() Need delay:6429 **********15
 ifno2dot1x_if[2]=0
 dot1x_wireless_if_mask=0x4
 Lantiq TAPI device driver, version 3.11.0.3, (c) 2001-2010 Lantiq Deutschland GmbH
 [42] Allocate mailbox 8
 TAPI_init_task_queue: enter loop..8
 if_task[task_id=5]> if#3 closed 
 [37] Allocate mailbox 9
 [37] Allocate mailbox 10
 [37] Allocate mailbox 11
 [37] Allocate mailbox 12
 [37] Allocate mailbox 13
 [37] Allocate mailbox 14
 [37] Allocate mailbox 15
 [37] Allocate mailbox 16
 [37] Allocate mailbox 17
 [37] Allocate mailbox 18
 [37] Allocate mailbox 19
 [37] Allocate mailbox 20
 [37] Allocate mailbox 21
 [37] Allocate mailbox 22
 [37] Allocate mailbox 23
 [37] Allocate mailbox 24
 [37] Allocate resource 132, FreeResource = 4
 ifx_tapi_KPI_IngressThread() check: [TAPIkpi_in],8063DB3C,pid=0, 5
 ##### [IFXOS_ThreadInit] name <TAPIkpi_in>, tid 5, nStackSize=8000
 [37] Allocate resource 133, FreeResource = 5
 Lantiq MIPS34KEc MPS driver, version 2.2.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
 request_timer(2, 0x000001AE, 1)
 [KERN_INFO]request_timer(2, 0x000001AE, 1)...successful!
 ifx_mps_init_gpt() - calibration done, waited 418 loops!
 ifx_mps_init_structures request_irq 1 146
 IrqConnect : IRQ = 146, Handler = 0x804DBCBC
 ifx_mps_init_structures request_irq 2 147
 IrqConnect : IRQ = 147, Handler = 0x804DBDF8
 ifx_mps_init_structures request_irq 3 0 142
 IrqConnect : IRQ = 142, Handler = 0x804DBEA0
 ifx_mps_init_structures request_irq 3 1 143
 IrqConnect : IRQ = 143, Handler = 0x804DBEA0
 ifx_mps_init_structures request_irq 3 2 144
 IrqConnect : IRQ = 144, Handler = 0x804DBEA0
 ifx_mps_init_structures request_irq 3 3 145
 IrqConnect : IRQ = 145, Handler = 0x804DBEA0
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 1 
 ifx_tapi_DeviceCreate: ndev = 0, TapiDev 81CEEE14
 Cap: INFINEON TECHNOLOGIES , type 0 = 0 size=21
 Cap: VMMC , type 1 = 6 size=4
 Cap: POTS , type 2 = 0 size=4
 Cap: PSTN , type 2 = 1 size=4
 Cap: DEVICE TYPE , type 11 = 6 size=11
 Cap: DEVICE VERSION , type 10 = 258 size=14
 ifx_tapi_ChannelPrepare: nChannel 0
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 2 
 ifx_tapi_ChannelPrepare: nChannel 1
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 3 
 ifx_tapi_ChannelPrepare: nChannel 2
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 4 
 ifx_tapi_ChannelPrepare: nChannel 3
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 5 
 ifx_tapi_ChannelPrepare: nChannel 4
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 6 
 ifx_tapi_ChannelPrepare: nChannel 5
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 7 
 ifx_tapi_ChannelPrepare: nChannel 6
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 8 
 ifx_tapi_ChannelPrepare: nChannel 7
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 9 
 [37] Allocate resource 134, FreeResource = 6
 Lantiq VMMC device driver, version 1.7.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
 vpe1_mem = 200000
 stlb = 0, vpe0_wired = 0 vpe1_wired=1
 Wired TLB entries for Linux read_c0_wired() = 0
 VMMC_Open : Major 122 Minor 10 
 VMMC_LL_Open: 8118d1dc
 VMMC_Open --> 81cdd2cc
 VMMC_handle[0] : 81cdd2cc
 VMMC_Open : Major 122 Minor 11 
 VMMC_LL_Open: 8118d248
 VMMC_Open --> 81cdd2b0
 VMMC_handle[1] : 81cdd2b0
 VMMC_Open : Major 122 Minor 12 
 VMMC_LL_Open: 8118d290
 VMMC_Open --> 81cdd294
 VMMC_handle[2] : 81cdd294
 VMMC_Open : Major 122 Minor 13 
 VMMC_LL_Open: 8118d2d8
 VMMC_Open --> 81cdd278
 VMMC_handle[3] : 81cdd278
 VMMC_Open : Major 122 Minor 14 
 VMMC_LL_Open: 8118d320
 VMMC_Open --> 81cdd25c
 VMMC_handle[4] : 81cdd25c
 VMMC_Open : Major 122 Minor 15 
 VMMC_LL_Open: 8118d368
 VMMC_Open --> 81cdd240
 VMMC_handle[5] : 81cdd240
 VMMC_Open : Major 122 Minor 16 
 VMMC_LL_Open: 8118d3b0
 VMMC_Open --> 81cdd224
 VMMC_handle[6] : 81cdd224
 VMMC_Open : Major 122 Minor 17 
 VMMC_LL_Open: 8118d3f8
 VMMC_Open --> 81cdd208
 VMMC_handle[7] : 81cdd208
 VMMC_Open : Major 122 Minor 18 
 VMMC_LL_Open: 8118d440
 VMMC_Open --> 81cdd1ec
 VMMC_handle[8] : 81cdd1ec
 [37] Allocate resource 135, FreeResource = 7
 [37] Allocate resource 136, FreeResource = 8
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 10 
 VMMC_Register_Callback(), registered for mpsCh=0 (success)
 VMMC_Register_Callback(), registered for mpsCh=1 (success)
 VMMC_Register_Callback(), registered for mpsCh=2 (success)
 VMMC_Register_Callback(), registered for mpsCh=3 (success)
 VMMC_Register_Callback(), registered for mpsCh=4 (success)
 VMMC_Register_Callback(), registered for mpsCh=5 (success)
 VMMC_Register_Callback(), registered for mpsCh=6 (success)
 [get_vcpufirmware_address] DSP firmware: [5 -1], dCnt:1
 Unzipping from B0401000 to 8325A858 ... [ZIP 2] 
 --> vinax_task() started ...
 <6>ADM5120 Board Driver, Version 0.0.4.1
 <6>(c) Copyright 2003, Infineon Technologies AG
 Board_InitIrq!
 Board_InitIrq!
 --> drv_danube_rb_init() finished ...
 MEI CPE Driver, Version 1.4.1
 (c) Copyright 2012, Lantiq Deutschland GmbH
 ### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
 Using major number 4
 ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 9 regid 0 regbit 9
 ifx_pmu_set: Module DSL-DFE has been activated 2 times before
 --> drv_vinax_init() finished ...
 get_sleep_evt = 96
 --> DSL_ModuleInit() finished ...
 MEI_OpenOS() line:0 begin ...
 -->VINAX control device open finished ...
 T >> init dev: base address = 0xBE116000
 T >> parse: opt value = 99
 T >> open device: /dev/mei_cpe/0.
 MEI_drv_test(): fd = 0
 T >> ioct(FIO_MEI_DEV_INIT): baseaddr = 0xBE116000, IRQ = 99
 pInitDev->meiBaseAddr=0xbe116000
 MEI_DRV[00]: INIT DEVICE - NO INTERUPTS --> ACTIVE POLL MODE
 MEI_DRV[00]: Start Driver Control Thread
 ##### [IFXOS_ThreadInit] name <VrxCtrl>, tid 43, nStackSize=10000
 *********************************************
 pMeiDev->meiERBbuf.pERB = 0xA14D5980
 *********************************************
 DSM MAC Address: 00:de:ad:be:ef:33
 T >> Line = 00 Return = 0
 --> drv_vinax_cfg() finished ...
 [DSL_CPE_ArgParse] fw1 name=
 Image[1] at 0xB00E0000, len=2256500, type=0
 Image[2] at 0xB0307000, len=163117, type=10
 Image[3] at 0xB032F000, len=218399, type=11
 Image[4] at 0xB0364800, len=234402, type=12
 Image[5] at 0xB039DC00, len=405875, type=60
 Image[6] at 0xB0401000, len=387052, type=90
 [get_datapump_address] Datapump for Annex A0:-1, B0:4, C0:-1
 [get_datapump_address] Datapump for Annex A1:-1, B1:-1, C1:-1
 [get_datapump_address] r_img=4, t_img=6
 Unzip VDSL2 firmware ...
 ht_ListenPort_addV6: if_addr:FE80:0000:0000:0000:0000:0000:0000:0001, port=80, isSecured=0
 Add ListenPort for V6 successfully(port 80)
 Advertising(Periodly Sending RA): On 
 [ipv6_autocfg_task] run RFC_6204_WPD_4_task() successfully.
 [ipv6_autocfg_task] If(2)
 [ipv6_autocfg_task] If(2) ready
 [ipv6_setup_interface] ifno=2, if_table[2].ipv6_UnicastAddr=0x0, if_table[2].ipv6_MulticastAddr=0x8312b840
 [nd_Tick] Tick! time 1992, ifno=1, 1 seconds is up, send one ND Router Advertisement
 [nd_SendRouterAdv] send RA (<U>,0) through IF1 ..
 [nd_Tick] ifno=1, MaxRtrAdvInterval 600, MinRtrAdvInterval 198, Next RandAdvInterval = 16 seconds
 done
 Uncompressed size = 568172
 Unzipping from B039DC00 to 8390C400 ... [ZIP 2] done
 Uncompressed size = 877836
 DSL_CPE_Open() : /dev/dsl_cpe_api/0
 get_sleep_evt = 97
 DSL_FIO_VERSION_INFORMATION_GET=0xc0287204 in control
 DSL_FIO_INSTANCE_CONTROL_SET=0xc00c7224 in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 Advertising(Periodly Sending RA): On 
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 [ipv6_autocfg_task] run RFC_6204_WPD_4_task() successfully.
 [restart_dhcpv6s] ifno=1
 [restart_dhcpv6s] AddrPool[0].used=1
 [restart_dhcpv6s] dump AddrPool[0].inmap addresses
 2001:0288:0001:0250:0000:0000:0000:0010
 2001:0288:0001:0250:0000:0000:0000:0011
 2001:0288:0001:0250:0000:0000:0000:0012
 2001:0288:0001:0250:0000:0000:0000:0013
 2001:0288:0001:0250:0000:0000:0000:0014
 2001:0288:0001:0250:0000:0000:0000:0015
 2001:0288:0001:0250:0000:0000:0000:0016
 2001:0288:0001:0250:0000:0000:0000:0017
 2001:0288:0001:0250:0000:0000:0000:0018
 2001:0288:0001:0250:0000:0000:0000:0019
 2001:0288:0001:0250:0000:0000:0000:001A
 2001:0288:0001:0250:0000:0000:0000:001B
 2001:0288:0001:0250:0000:0000:0000:001C
 2001:0288:0001:0250:0000:0000:0000:001D
 2001:0288:0001:0250:0000:0000:0000:001E
 2001:0288:0001:0250:0000:0000:0000:001F
 2001:0288:0001:0250:0000:0000:0000:0020
 2001:0288:0001:0250:0000:0000:0000:0021
 2001:0288:0001:0250:0000:0000:0000:0022
 2001:0288:0001:0250:0000:0000:0000:0023
 [restart_dhcpv6s] SrvInfo_s.SERVER_DUID.data._LLT.hwType=1
 [restart_dhcpv6s] SrvInfo_s.SERVER_DUID.data._LLT.llAddr: 00:de:ad:be:ef:33
 [restart_dhcpv6s] SrvInfo_s.SrvIf[0].ifno = 1;
 [restart_dhcpv6s] create server UDP socket (interface 1)
 IP_ADD_MEMBERSHIP: ffffffff81541340
 IP_ADD_MEMBERSHIP: ffffffff81541340
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 [restart_dhcpv6s] DHCPv6 Server: Task Success.
 DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
 Firmware WHAT String-1 (#): 5.6.7.6.1.7
 Firmware WHAT String-2 (#): 5.6.7.2.1.2
 FwApplication1 = 7 FwApplication2 = 2
 Firmware WHAT String-1 (~): V0x1
 Firmware WHAT String-2 (~): 
 VDSL in DSL_CPE_DeviceInit
 DSL[00]: DSL_DRV_Init(): pData->data.pFirmware     = 0x8390c400
 DSL[00]: DSL_DRV_Init(): pData->data.nFirmwareSize = 0xd650c
 DSL[00]: DSL_DRV_FwDownload called.
 DSL[00]: DSL_FW_REQUEST_VDSL in DSL_DRV_DEV_FwDownload, PortMode = SINGLE
 IFX_MPS: Download firmware (size 568172 bytes)...
 cpu1_base_addr 83f00000 (0)
 evtWaitQue=97
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 MEI_DRV[00-01]: ERROR ioctl - inval state, not ready for send !!!
 DSL[00]: Error -1021 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x1985), FctCode 0xFFFF!
 nReturn=-2
  @@@ dms 2d08 0 1
 MEI_DRV[00-01]: ERROR ioctl - inval state, not ready for send !!!
 DSL[00]: Error -1021 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D08), FctCode 0xFFFF!
 nReturn=-2
 [restart_dhcpv6c] ifno=1,M_flag=0x0,O_flag=0x1,stop=0,gSetting.Interface[1].RunDHCPc6Client=0
 FW_FORMAT_NEW!
 VPE loader: VPE1 running successfully
 [USBLPT] Printer Initialize Fail : Plug Out !!
 padmin_task_entry() task running
 ********** upnp_main() Unsupportted UPnP root device:0
 upnp_main(1-0) Run-up UPnP device IGD...
 [Init_SSLClient] Certificate_Id=0, nConnectProtocol=6
 *********************************************
 ****Wi-Fi Simple Config Application***** 
 Version: Build 2.02.2.DTM1.1, Jul 21 2016 19:46:47
 *********************************************
 wsc_Send_UPNP_packet> enter
 wsc_Send_eap_packet:udpFdupnp_wcn:32;;udpFdupnp:34
 ifStrInit()> i:0, dtlStr:[Loop/Loop], rfStr[LB0], type:0, count:1
 ifStrInit()> i:1, dtlStr:[LAN 1/LAN1], rfStr[L1], type:1, count:1
 ifStrInit()> i:2, dtlStr:[WLAN1/WLAN1], rfStr[WL1], type:3, count:1
 ifStrInit()> i:3, dtlStr:[ATM 1/ATM1], rfStr[A1], type:5, count:1
 ifStrInit()> i:4, dtlStr:[ATM 2/ATM2], rfStr[A2], type:5, count:2
 ifStrInit()> i:5, dtlStr:[ATM 3/ATM3], rfStr[A3], type:5, count:3
 ifStrInit()> i:6, dtlStr:[ATM 4/ATM4], rfStr[A4], type:5, count:4
 ifStrInit()> i:7, dtlStr:[ATM 5/ATM5], rfStr[A5], type:5, count:5
 ifStrInit()> i:8, dtlStr:[ATM 6/ATM6], rfStr[A6], type:5, count:6
 ifStrInit()> i:9, dtlStr:[ATM 7/ATM7], rfStr[A7], type:5, count:7
 ifStrInit()> i:10, dtlStr:[ATM 8/ATM8], rfStr[A8], type:5, count:8
 ifStrInit()> i:11, dtlStr:[PoE 1/PoE1], rfStr[P1], type:6, count:1
 ifStrInit()> i:12, dtlStr:[PoE 2/PoE2], rfStr[P2], type:6, count:2
 ifStrInit()> i:13, dtlStr:[PoE 3/PoE3], rfStr[P3], type:6, count:3
 ifStrInit()> i:14, dtlStr:[PoE 4/PoE4], rfStr[P4], type:6, count:4
 ifStrInit()> i:15, dtlStr:[PoE 5/PoE5], rfStr[P5], type:6, count:5
 ifStrInit()> i:16, dtlStr:[PoE 6/PoE6], rfStr[P6], type:6, count:6
 ifStrInit()> i:17, dtlStr:[PoE 7/PoE7], rfStr[P7], type:6, count:7
 ifStrInit()> i:18, dtlStr:[PoE 8/PoE8], rfStr[P8], type:6, count:8
 ifStrInit()> i:19, dtlStr:[CLONE1/CLONE1], rfStr[CL1], type:9, count:1
 ifStrInit()> i:20, dtlStr:[WDS1/WDS1], rfStr[WD1], type:8, count:1
 ifStrInit()> i:21, dtlStr:[WDS2/WDS2], rfStr[WD2], type:8, count:2
 ifStrInit()> i:22, dtlStr:[WDS3/WDS3], rfStr[WD3], type:8, count:3
 ifStrInit()> i:23, dtlStr:[WDS4/WDS4], rfStr[WD4], type:8, count:4
 ifStrInit()> i:24, dtlStr:[/], rfStr[], type:12, count:0
 ptp Daemon task running
 [sslc_conf_init] cert_array->verify_peer=1
 [28] sslc_conf_init> ssl client info:
 [28] PrivateKey=
 [28] MyCertificate=
 [28] CaCertificate=
 [28] SSL_method=31
 [28] verify_mode=1
 [28] cipher_suites=ADH:SHA1:HIGH:EXP
 [28] tftp_server_ip=140.92.61.131
 [28] fn_myCerttificate=ServCert.pem
 [28] fn_privateKey=PrivKey.pem
 [28] fn_caCertificate=CaCert.pem
 [28] sslc_conf_init> ssl client info end:
 [28] sslc_conf_init> pCtx=0x81cd9c10 in ssld_conf_init
 
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!!
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!!
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( ExtraCA1 ) ok!!sslc_ctx_reset_cert> this is pkcs12 type certificate
 
 [28] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
 [28] sslc_conf_init> sslc_conf_init() ok
 [Init_SSLClient] Certificate_Id=0, nConnectProtocol=6
 [sslc_conf_init] cert_array->verify_peer=1
 [28] sslc_conf_init> ssl client info:
 [28] PrivateKey=
 [28] MyCertificate=
 [28] CaCertificate=
 [28] SSL_method=33
 [28] verify_mode=1
 [28] cipher_suites=ADH:SHA1:HIGH:EXP
 [28] tftp_server_ip=140.92.61.131
 [28] fn_myCerttificate=ServCert.pem
 [28] fn_privateKey=PrivKey.pem
 [28] fn_caCertificate=CaCert.pem
 [28] sslc_conf_init> ssl client info end:
 [28] sslc_conf_init> pCtx=0x81cb6d10 in ssld_conf_init
 
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!!
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!!
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!
 [28] sslc_ctx_reset_cert> re-LoadCACertificate( ExtraCA1 ) ok!!sslc_ctx_reset_cert> this is pkcs12 type certificate
 
 [28] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
 [28] sslc_conf_init> sslc_conf_init() ok
 lpd Daemon task running
 upnp_Init(0) upnpGlobalInit[1]:0
 SSDP Initialization completed...
 GenaInit : event_hook is NULL!!
 [USB ROOTHUB_LOOP] RUNTASK id=51 lpd_main ...
 [USB] lpd_init() End.
 printer schedule task running
 
 >> Parse Service 'urn:schemas-microsoft-com:service:OSInfo:1' : TRUE
 >> Parse Service 'urn:schemas-upnp-org:service:Layer3Forwarding:1' : TRUE
 >> Parse Service 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1' : TRUE
 >> Parse Service 'urn:schemas-upnp-org:service:WANEthernetLinkConfig:1' : TRUE
 >> Parse Service 'urn:schemas-upnp-org:service:WANPPPConnection:1' : TRUE
 >> Parse Service 'urn:schemas-upnp-org:service:WANIPConnection:1' : TRUE
 >> Parse Device 'urn:schemas-upnp-org:device:WANConnectionDevice:1' : TRUE
 >> Parse Device 'urn:schemas-upnp-org:device:WANDevice:1' : TRUE
 >> Parse Device 'urn:schemas-upnp-org:device:InternetGatewayDevice:1' : TRUE
 ********** upnp_main1() Record pDevRoot[1]:81c8fd64
 
 >>>> UPNP init successfully ...
 ********** upnp_main() Unsupportted UPnP root device:2
 upnp_main(3-0) Run-up UPnP device WPS-WCN...
 upnp_Init(0) upnpGlobalInit[3]:0
 
 >> Parse Service 'urn:schemas-wifialliance-org:service:WFAWLANConfig:1' : TRUE
 >> Parse Device 'urn:schemas-wifialliance-org:device:WFADevice:1' : TRUE
 ********** upnp_main1() Record pDevRoot[3]:81c65930
 
 >>>> UPNP init successfully ...
 ********** upnp_main() Unsupportted UPnP root device:4
 ********** upnp_main() Unsupportted UPnP root device:5
 ********** upnp_main() Unsupportted UPnP root device:6
 MEI_DRV: Cntrl Thr Enter - VrxCtrl
 DSL[00]: Autoboot State : firmwareReady
 ##### [IFXOS_ThreadInit] name <autbtex>, tid 27, nStackSize=20000
 ##### [IFXOS_ThreadInit] name <pmex_ne>, tid 55, nStackSize=20000
 ##### [IFXOS_ThreadInit] name <pmex_fe>, tid 56, nStackSize=20000
 DSL[00]: DSL_DRV_AutobootThreadMain() running ...
 StatusData.nStatus=1
 
 [restart_dhcpv6c] ifno=2,M_flag=0x0,O_flag=0x1,stop=0,gSetting.Interface[2].RunDHCPc6Client=0
 usb_power_set(2) min time delay:6000, current delay:6500
 dwc_otg_vbus_on(NULL) Enable USB power!!
 usb_hcd_init() func(0):0
 usb_hcd_init() func(1):0
 usb_hcd_init() func(2):0
 usb_hcd_init() func(3):1
 localhc_init() install otg driver(self->driver = 0x8096E23C, otg_driver=0x8096E23C).
 usb_hcd_init() func(4):1
 localhc_init() install otg driver(self->driver = 0x8096E23C, otg_driver=0x8096E23C).
 usb_hcd_init(): succ.
 StatusData.nStatus=2
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 DSL[00]: xtseCfg = 16_0_16_64_0_4_1_7 PTM
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=0 
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=5
 nReturn=0 nData="5048 0000 0001 "
 nReturn=0 nData="E843 0003 0001 0008 "
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 IFXOS_EventWait: -20
 ifx_mps_get_fw_version: ifx_mps_mbx_write_message...
 ifx_mps_get_fw_version: Before sleep
 ifx_mps_get_fw_version: After sleep!
 ifx_mps_get_fw_version: ifx_mps_mbx_read_message retval 0 bytes_read 8
 ok!
 Version 1.0.0.7.0 up and running...
 VMMC_TAPI_LL_FW_Start: ifx_mps_ioctl ret 0
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 [37] Allocate resource 137, FreeResource = 9
 [37] Allocate resource 138, FreeResource = 10
 [37] Allocate resource 139, FreeResource = 11
 [37] Allocate resource 140, FreeResource = 12
 [37] Allocate resource 141, FreeResource = 13
 [37] Allocate resource 142, FreeResource = 14
 [37] Allocate resource 143, FreeResource = 15
 [37] Allocate resource 144, FreeResource = 16
 [37] Allocate resource 145, FreeResource = 17
 [37] Allocate resource 146, FreeResource = 18
 [37] Allocate resource 147, FreeResource = 19
 [37] Allocate resource 148, FreeResource = 20
 [37] Allocate resource 149, FreeResource = 21
 [37] Allocate resource 150, FreeResource = 22
 [37] Allocate resource 151, FreeResource = 23
 [37] Allocate resource 152, FreeResource = 24
 [37] Allocate resource 153, FreeResource = 25
 [37] Allocate resource 154, FreeResource = 26
 [37] Allocate resource 155, FreeResource = 27
 [37] Allocate resource 156, FreeResource = 28
 [37] Allocate resource 157, FreeResource = 29
 [37] Allocate resource 158, FreeResource = 30
 [37] Allocate resource 159, FreeResource = 31
 [37] Allocate resource 160, FreeResource = 32
 [37] Allocate resource 161, FreeResource = 33
 [37] Allocate resource 162, FreeResource = 34
 [37] Allocate resource 163, FreeResource = 35
 [37] Allocate resource 164, FreeResource = 36
 [37] Allocate resource 165, FreeResource = 37
 [37] Allocate resource 166, FreeResource = 38
 [37] Allocate resource 167, FreeResource = 39
 [37] Allocate resource 168, FreeResource = 40
 [37] Allocate resource 169, FreeResource = 41
 [37] Allocate resource 170, FreeResource = 42
 IFXOS_EventWait: -20
 
 FWVERS: 1.0.0  Platform:0x07 Customer:0x00
 IFXOS_EventWait: -20
 Config Method:0x84
 *********************************************
 ***Waiting for Registrar to connect...***
 *********************************************
 IFXOS_EventWait: -20
 IFXOS_EventWait: -20
 StatusData.nStatus=2
 IFXOS_EventWait: -20
 VMMC_TAPI_LL_FW_Init: VMMC_ALM_SmartSLIC_ChGet 2 2
 
 FWCAP: nPCM: 8  nALM: 2  nSIG: 5  nCOD: 5  nDECT: 6
 FWCAP: nNLEC: 4 nWLEC: 4 nES: 4   nAGC: 5  nFAX: 5
 FWCAP: nUTG:16  UTG/CH: 2 nMFTD: 5 nLIN: 2
 FWCAP: nDTMFR: 5 nDTMFG: 5 nCIDS: 5 nCIDR: 5
 VMMC_AddCaps: CODECS = 5cf
 IFXOS_EventWait: -20
 IFXOS_EventWait: -20
 
 in silent mode, power up PHY
 IFXOS_EventWait: -20
 IFXOS_EventWait: -20
 IFXOS_EventWait: -20
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 11 
 [37] Allocate resource 171, FreeResource = 43
 >>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 12 
 [37] Allocate resource 172, FreeResource = 44
 IFX_TAPI_Phone_Init: TAPI BBD_Dnld 0
 ===> 
 Set PCM I/F 0 VMMC_handle:81cdd2cc
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
  VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok!
  VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok!
 Set PCM I/F 1 VMMC_handle:81cdd2b0
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
  VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok!
  VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok!
 Set PCM I/F 2 VMMC_handle:81cdd294
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
 Set PCM I/F 3 VMMC_handle:81cdd278
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
 Set PCM I/F 4 VMMC_handle:81cdd25c
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
 Set PCM I/F 5 VMMC_handle:81cdd240
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
 Set PCM I/F 6 VMMC_handle:81cdd224
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
 Set PCM I/F 7 VMMC_handle:81cdd208
 IFX_TAPI_Phone_Init: TAPI FW_Start 0
 ===> 
 Set PCM I/F 8 VMMC_handle:81cdd1ec
 Setting HOOK Related Parameters 0
 Setting HOOKFLASH_TIME min 80 ms max 900 ms
 Setting HOOKON_TIME min 320 max 320
 Setting HOOK Related Parameters 1
 Setting HOOKFLASH_TIME min 80 ms max 900 ms
 Setting HOOKON_TIME min 320 max 320
 Setting HOOK Related Parameters 2
 Setting HOOK Related Parameters 3
 RUNTASK id=30 VINETIC_DRV_Task...
 [61] Allocate mailbox 25
 RUNTASK id=61 VINETIC_T38_Task...
 RUNTASK id=63 FXO_flash_task...
 RUNTASK id=62 VOICE_API_task...
 ************** Enable ProDaaCheckInterrupt() detect 9823
 RUNTASK id=64 Atheros_NetTask ...
 IrqConnect : IRQ = 22, Handler = 0x801DF24C
 <-- RTMPAllocTxRxRingMemory, Status=0
 Channel=0
 rtmp_read_wds_from_file() is called !!!
 rtmp_read_wds_from_file : WDS disabled 
 [reset_802dot1x] wireless module ready
 [init_wpa] dot1x_ready[0]=3,configp->ifno:2,ssid:o2-WLAN89
 
 [GreenAP Enable]
 [RTMPSetProfileParameter] AntDiversity=0
 config->enablePreAuthen=1
 install group key to Mac ASIC ????????????????????????
 [init_wpa] dot1x_ready[1]=3,configp->ifno:20,ssid:
 [init_wpa] dot1x_ready[2]=3,configp->ifno:21,ssid:
 [init_wpa] dot1x_ready[3]=3,configp->ifno:22,ssid:
 [init_wpa] dot1x_ready[4]=3,configp->ifno:23,ssid:
 Magic No. in Boot Param check OK!!!
 sould check E2PROM MAC ?????????????????
 NICReadEEPROMParameters 885 
 NICReadEEPROMParameters 948 
 NICReadEEPROMParameters 973 
 [reset_802dot1x] 802.1Xv2 ready
 [APStartUp] pAd->ApCfg.bGreenAPEnable:1
 [APStartUp] Call EnableAPMIMOPS
 <==== rt28xx_init, Status=0
 0x1300 = 00064300
 ND 2 ???
 ND 1 ???
 pAd->VirtualIfCnt 1
 Relay Off now ch:0
 
 [TEL_MGR_GetActiveCallChannel] phoneIdx:1, channel_id: 0 ********
 
 [TEL_MGR_GetActiveCallChannel] phoneIdx:2, channel_id: 1 ********
 When * the value is 60000
 When * the value is 60000
 When * the value is 60000
 sys_voip_cfg->cpt.reorder = 425@-280;60(.25/.25/1)
 TEL_DRV_TONE_REORDER  duration = 500
 When * the value is 60000
 [37] Allocate resource 173, FreeResource = 45
 [37] Allocate mailbox 26
 TEL_MGR_Init
 [37] Allocate resource 174, FreeResource = 46
 tel_mgr_mutex=174
 [37] Allocate mailbox 27
  TEL_DM_Init
 [37] Allocate resource 175, FreeResource = 47
 [37] Allocate resource 176, FreeResource = 48
 
 [TEL_MGR_SetDigitMap] , 20
 
 [TEL_MGR_SetDigitMap] , 21
 
 [TEL_MGR_SetDigitMap] , 23
 
 [TEL_MGR_SetDigitMap] , 24
 
 [TEL_MGR_SetDigitMap] , 25
 
 [TEL_MGR_SetDigitMap] , 26
 
 [TEL_MGR_SetDigitMap] , 27
 
 [TEL_MGR_SetDigitMap] , 28
 
 [TEL_MGR_SetDigitMap] , 37
 
 [TEL_MGR_SetDigitMap] , 38
 
 [TEL_MGR_SetDigitMap] , 6
 
 [TEL_MGR_SetDigitMap] , 7
 
 [TEL_MGR_SetDigitMap] , 8
 
 [TEL_MGR_SetDigitMap] , 9
 
 [TEL_MGR_SetDigitMap] , 10
 
 [TEL_MGR_SetDigitMap] , 11
 
 [TEL_MGR_SetDigitMap] , 12
 
 [TEL_MGR_SetDigitMap] , 13
 
 [TEL_MGR_SetDigitMap] , 16
 
 [TEL_MGR_SetDigitMap] , 17
 
 [TEL_MGR_SetDigitMap] , 18
 
 [TEL_MGR_SetDigitMap] , 19
 
 [TEL_MGR_SetDigitMap] , 31
 
 [TEL_MGR_SetDigitMap] , 32
 
 [TEL_MGR_SetDigitMap] , 33
 
 [TEL_MGR_SetDigitMap] , 34
 
 [TEL_MGR_SetDigitMap] , 35
 
 [TEL_MGR_SetDigitMap] , 36
 
 [TEL_MGR_SetDigitMap] , 1
 
 [TEL_MGR_SetDigitMap] , 4
 
 [TEL_MGR_SetDigitMap] , 5
 
 [TEL_MGR_SetDigitMap] , 2
 
 [TEL_MGR_SetDigitMap] , 3
 
 [TEL_MGR_SetDigitMap] [2-9]#, 47
 
 [TEL_MGR_SetDigitMap] , 48
 
 [TEL_MGR_SetDigitMap] , 41
 
 [TEL_MGR_SetDigitMap] , 42
 
 [TEL_MGR_SetDigitMap] , 43
 
 [TEL_MGR_SetDigitMap] , 44
 
 [TEL_MGR_SetDigitMap] , 45
 
 [TEL_MGR_SetDigitMap] , 46
 
 [TEL_MGR_SetDigitMap] (*xx*xx.#|#xx#|*#xx#|xx.), 74
 
 [TEL_MGR_SetDigitMap] #15#, 73
 
 [TEL_MGR_SetDigitMap] *43#, 20
 
 [TEL_MGR_SetDigitMap] #43#, 21
 
 [TEL_MGR_SetDigitMap] *#43#, 22
 
 [TEL_MGR_SetDigitMap] , 27
 
 [TEL_MGR_SetDigitMap] , 28
 
 [TEL_MGR_SetDigitMap] , 50
 
 [TEL_MGR_SetDigitMap] , 51
 
 [TEL_MGR_SetDigitMap] , 52
 
 [TEL_MGR_SetDigitMap] , 54
 
 [TEL_MGR_SetDigitMap] , 55
 
 [TEL_MGR_SetDigitMap] , 56
 
 [TEL_MGR_SetDigitMap] , 57
 
 [TEL_MGR_SetDigitMap] , 58
 
 [TEL_MGR_SetDigitMap] , 59
 
 [TEL_MGR_SetDigitMap] , 60
 
 [TEL_MGR_SetDigitMap] , 61
 
 [TEL_MGR_SetDigitMap] , 62
 
 [TEL_MGR_SetDigitMap] , 63
 
 [TEL_MGR_SetDigitMap] , 64
 
 [TEL_MGR_SetDigitMap] , 65
 
 [TEL_MGR_SetDigitMap] , 66
 
 [TEL_MGR_SetDigitMap] , 67
 
 [TEL_MGR_SetDigitMap] , 68
 
 [TEL_MGR_SetDigitMap] , 69
 
 [TEL_MGR_SetDigitMap] , 70
 
 [TEL_MGR_SetDigitMap] , 71
 
 [TEL_MGR_SetDigitMap] , 72
 
 [TEL_MGR_SetDigitMap] , 97
 
 [TEL_MGR_SetDigitMap] , 98
 
 [TEL_MGR_SetDigitMap] , 99
 
 [TEL_MGR_SetDigitMap] , 20
 
 [TEL_MGR_SetDigitMap] , 21
 
 [TEL_MGR_SetDigitMap] , 23
 
 [TEL_MGR_SetDigitMap] , 24
 
 [TEL_MGR_SetDigitMap] , 25
 
 [TEL_MGR_SetDigitMap] , 26
 
 [TEL_MGR_SetDigitMap] , 27
 
 [TEL_MGR_SetDigitMap] , 28
 
 [TEL_MGR_SetDigitMap] , 37
 
 [TEL_MGR_SetDigitMap] , 38
 
 [TEL_MGR_SetDigitMap] , 6
 
 [TEL_MGR_SetDigitMap] , 7
 
 [TEL_MGR_SetDigitMap] , 8
 
 [TEL_MGR_SetDigitMap] , 9
 
 [TEL_MGR_SetDigitMap] , 10
 
 [TEL_MGR_SetDigitMap] , 11
 
 [TEL_MGR_SetDigitMap] , 12
 
 [TEL_MGR_SetDigitMap] , 13
 
 [TEL_MGR_SetDigitMap] , 16
 
 [TEL_MGR_SetDigitMap] , 17
 
 [TEL_MGR_SetDigitMap] , 18
 
 [TEL_MGR_SetDigitMap] , 19
 
 [TEL_MGR_SetDigitMap] , 31
 
 [TEL_MGR_SetDigitMap] , 32
 
 [TEL_MGR_SetDigitMap] , 33
 
 [TEL_MGR_SetDigitMap] , 34
 
 [TEL_MGR_SetDigitMap] , 35
 
 [TEL_MGR_SetDigitMap] , 36
 
 [TEL_MGR_SetDigitMap] , 1
 
 [TEL_MGR_SetDigitMap] , 4
 
 [TEL_MGR_SetDigitMap] , 5
 
 [TEL_MGR_SetDigitMap] , 2
 
 [TEL_MGR_SetDigitMap] , 3
 
 [TEL_MGR_SetDigitMap] [2-9]#, 47
 
 [TEL_MGR_SetDigitMap] , 48
 
 [TEL_MGR_SetDigitMap] , 41
 
 [TEL_MGR_SetDigitMap] , 42
 
 [TEL_MGR_SetDigitMap] , 43
 
 [TEL_MGR_SetDigitMap] , 44
 
 [TEL_MGR_SetDigitMap] , 45
 
 [TEL_MGR_SetDigitMap] , 46
 
 [TEL_MGR_SetDigitMap] (*xx*xx.#|#xx#|*#xx#|xx.), 74
 
 [TEL_MGR_SetDigitMap] #15#, 73
 
 [TEL_MGR_SetDigitMap] *43#, 20
 
 [TEL_MGR_SetDigitMap] #43#, 21
 
 [TEL_MGR_SetDigitMap] *#43#, 22
 
 [TEL_MGR_SetDigitMap] , 27
 
 [TEL_MGR_SetDigitMap] , 28
 
 [TEL_MGR_SetDigitMap] , 50
 
 [TEL_MGR_SetDigitMap] , 51
 
 [TEL_MGR_SetDigitMap] , 52
 
 [TEL_MGR_SetDigitMap] , 54
 
 [TEL_MGR_SetDigitMap] , 55
 
 [TEL_MGR_SetDigitMap] , 56
 
 [TEL_MGR_SetDigitMap] , 57
 
 [TEL_MGR_SetDigitMap] , 58
 
 [TEL_MGR_SetDigitMap] , 59
 
 [TEL_MGR_SetDigitMap] , 60
 
 [TEL_MGR_SetDigitMap] , 61
 
 [TEL_MGR_SetDigitMap] , 62
 
 [TEL_MGR_SetDigitMap] , 63
 
 [TEL_MGR_SetDigitMap] , 64
 
 [TEL_MGR_SetDigitMap] , 65
 
 [TEL_MGR_SetDigitMap] , 66
 
 [TEL_MGR_SetDigitMap] , 67
 
 [TEL_MGR_SetDigitMap] , 68
 
 [TEL_MGR_SetDigitMap] , 69
 
 [TEL_MGR_SetDigitMap] , 70
 
 [TEL_MGR_SetDigitMap] , 71
 
 [TEL_MGR_SetDigitMap] , 72
 
 [TEL_MGR_SetDigitMap] , 97
 
 [TEL_MGR_SetDigitMap] , 98
 
 [TEL_MGR_SetDigitMap] , 99
  TEL_MGR_VoiceChannelInit
 
 [RestoreSpeedDialDataFromGSetting] p1: xxxxxxxxxxxxx
 
 [RestoreSpeedDialDataFromGSetting] p1: xxxxxxxxxxxxx
 
 [htf_dbg]     - OnlineActiveWirless() 1404
 Do APScan()
 
 xSpeedtsk priority is 80
 
 [RestoreSpeedDialDataFromGSetting] p1: xxxxxxxxxxxxx
 
 [...]
 
 [37] Allocate resource 177, FreeResource = 49
 [37] Allocate mailbox 28
 [69] Allocate resource 178, FreeResource = 50
 [69] Allocate resource 179, FreeResource = 51
 [SIP_CORE_Task] sip_core_ready
 TEL_MGR_SetVoipPhoneEvtHookFunc
 TEL_MGR_SetVoipPhoneEvtHookFunc
 [37] Allocate resource 180, FreeResource = 52
 [37] Allocate mailbox 29
 VOICE_IVR_Init: voice_ivr_channel[0].ivrQueueId = 29
 [37] Allocate mailbox 30
 VOICE_IVR_Init: voice_ivr_channel[1].ivrQueueId = 30
 [37] Allocate mailbox 31
 VOICE_IVR_Init: voice_ivr_channel[2].ivrQueueId = 31
 [37] Allocate mailbox 32
 VOICE_IVR_Init: voice_ivr_channel[3].ivrQueueId = 32
 TEL_MGR_DisableDebug
 autoChannel : 1
 [WirelessCFG_task] CHannelBW:1
 [WirelessCFG_task] APOverlappingBSSScan()...
 
 [APOverlappingBSSScan] needFallBack:1
 WirelessMode 9 BasicRate 15
 AutochannelSelect 0 Channel 0 
 autoChannel : 1
 NEW : channel 1, BW 1(40MHZ), EXTCHA 1(ABOVE)
 Set_PreAuth_Proc called, PreAuth=1
 [APStartUp] pAd->ApCfg.bGreenAPEnable:1
 [APStartUp] Call EnableAPMIMOPS
 [APStartUp] pAd->ApCfg.bGreenAPEnable:1
 [APStartUp] Call EnableAPMIMOPS
 [signal_1x_reset] ...
 >>>>>>>>>>>>>>>>>>>>>>tick 17270
 [HWLAN] [65] rapi_tmr_task running 
 [USB] dwc3884_start() Core id:0, funcIdx:3
 setSynopsisPower() check clock gating...
 pll0 N = 124, M = 8, PLL_BP = 0, PLL_EN = 1
 pll1 N = 64, M = 5, K_hi = 467, K_lo = 659, phdiven = 1, dsmsel = 1, modulo = 2 PLL_BP = 0 PLL_EN = 1
 pll2 N = 11, M = 0, PLL_BP = 0, PLL_EN = 1
  do_div error ???
 pll0_fosc    = 1000000000
  do_div error ???
 pll1_fosc    = 392934082
 pll2_fosc    = 864000000
 cpu clock    = 500000000
 DDR clock    = 250000000
 FPI bus 1    = 250000000
 FPI bus 2    = 250000000
 PP32 clock   = 432000000
  do_div error ???
 PCI clock    = 33333333
 Ethernet MII0= 50000000
 Ethernet MII1= 50000000
 
  *IFX_CGU_IF_CLK 10e18008 
 USB clock    = 12000000
 Clockout0    = 0
 Clockout1    = 0
 Clockout2    = 0
 Clockout3    = 0
 ifx_get_fpi_hz 250000000
 *IFX_CGU_IF_CLK 10e1800b
 setSynopsisPower() set power...
 ifx_pmu_set: PMU_PWDCR0 = 0x84118093 module 6 regid 0 regbit 6
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module USB0-CTRL has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0x84118093 module 27 regid 0 regbit 27
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module USB1-CTRL has been activated 1 times before
 setSynopsisPower() USB PHY configurations...
 setSynopsisPower() set PMU...
 ifx_pmu_set: PMU_PWDCR0 = 0x84118092 module 0 regid 0 regbit 0
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module USB0-PHY has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0x80118092 module 26 regid 0 regbit 26
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module USB1-PHY has been activated 1 times before
 ifx_pmu_set: PMU_PWDCR0 = 0x80118092 module 9 regid 0 regbit 9
 ifx_pmu_set: Module DSL-DFE has been activated 3 times before
 ifx_pmu_set: PMU_PWDCR0 = 0x80110092 module 15 regid 0 regbit 15
 ifx_pmu_set: Actual enabling.......... 1
 ifx_pmu_set: Module AHBM has been activated 1 times before
 [USB] dwc3884_start() DWC3884 core version:0x4F54281A, 2.81a, channel:16
 [USB] dwc3884_reset(XR9) Reset In, core_id:0
 [USB] dwc3884_reset(VR9) IFX_RCU_USB0_CFG:0xBF203018, var:0x00001480
 [USB] dwc3884_reset(VR9) IFX_RCU_USB1_CFG:0xBF203034, var:0x00001400
 [USB] dwc3884_reset(VR9) IFX_RCU_RST_REQ:0xBF203010
 [USB] dwc3884_reset() rstctl:0xBE101010
 [USB] dwc3884_start() intsts:0xBE101014, var:0x54000029
 
 
 >>>>>> usbd_new_device: adding unit bus:1, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3
 
 usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
 usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 usbd_open_pipe_intr: ipipe=83903B80 repeat=0 xfer=A0DAE600
 usbd_probe_and_attach,probe 1!
 [USB] dwc3884_start() Core id:1, funcIdx:4
 [USB] dwc3884_start() DWC3884 core version:0x4F54281A, 2.81a, channel:16
 [USB] dwc3884_reset(XR9) Reset In, core_id:1
 [USB] dwc3884_reset() rstctl:0xBE106010
 [USB] dwc3884_start() intsts:0xBE106014, var:0x54000029
 [nd_Tick] Tick! time 17998, ifno=1, 16 seconds is up, send one ND Router Advertisement
 [nd_SendRouterAdv] send RA (<U>,1) through IF1 ..
 [nd_Tick] ifno=1, MaxRtrAdvInterval 600, MinRtrAdvInterval 198, Next RandAdvInterval = 16 seconds
 
 
 >>>>>> usbd_new_device: adding unit bus:2, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3
 
 usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
 usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 usbd_open_pipe_intr: ipipe=83904300 repeat=0 xfer=A0DAEB80
 ifno2dot1x_if[2]=0
 dot1x_wireless_if_mask=0x4
 [reset_802dot1x] wireless module ready
 [init_wpa] dot1x_ready[0]=3,configp->ifno:2,ssid:o2-WLAN89
 config->enablePreAuthen=1
 install group key to Mac ASIC ????????????????????????
 [init_wpa] dot1x_ready[1]=3,configp->ifno:20,ssid:
 [init_wpa] dot1x_ready[2]=3,configp->ifno:21,ssid:
 [init_wpa] dot1x_ready[3]=3,configp->ifno:22,ssid:
 [init_wpa] dot1x_ready[4]=3,configp->ifno:23,ssid:
 usbd_probe_and_attach,probe 1!
 startExplore() usb explore task run-up, slot:0, tsk_id:36, reason:0
 usb_hc_install_interrupt() Install OTG-1 interrupt 54
 IrqConnect : IRQ = 54, Handler = 0x804B3E84
 IrqConnect : IRQ = 60, Handler = 0x804B7D5C
 usb_hc_install_interrupt() Install OTG-2 interrupt 83
 IrqConnect : IRQ = 83, Handler = 0x804B3EB0
 USB Module: Version 2.0.0 build Jul 21 2016 19:46:20
 [reset_802dot1x] 802.1Xv2 ready
 usb_explore_task() Begin ...
 
 [%%%%%%% saveRandomSeedTask]
 fwrite_specialConfigPara() Save random seed:15607764
 MXIC MX29GL128EL bottom boot 16-bit mode found
 erase from location b00a0000 done
 write length 0x5b0
 0[nd_Tick] Tick! time 33864, ifno=1, 16 seconds is up, send one ND Router Advertisement
 [nd_SendRouterAdv] send RA (<U>,2) through IF1 ..
 [nd_Tick] ifno=1, MaxRtrAdvInterval 600, MinRtrAdvInterval 198, Next RandAdvInterval = 300 seconds
 >>>>>>>>>>>Reboot on training timeout<<<<<<<<<
 DSL[00]: Reboot on training timeout (60)!!!
 DSL[00]: Autoboot State : Restart
 DSL[00]: Autoboot State : ShutDownRequest
 
  @@@ nLineState=2143 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownWait
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=2144 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=1 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownReached
 DSL[00]: Autoboot State : Restart
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=0 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : FirmwareRequest
 DSL[00]: Autoboot State : FirmwareWait
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=3
 
 
 DSL[00]: @@@@@@@@@@@@@ DSL_CPE_DownloadFirmware() @@@@@@@@@@@@@
 DSL[00]: nFwReqType = 3, Fw name1=NULL, name2=NULL
 DSL[00]: DSL_FW_REQUEST_ADSL in DSL_DRV_DEV_FwDownload
 DSL[00]: Autoboot State : firmwareReady
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 StatusData.nStatus=2
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=1 
 @@@ DSL_LINESTATE_IDLE dms 67C3 1 1 3100
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="67C3 0001 0001 "
 @@@ DSL_LINESTATE_IDLE dms 19C5 0 1 2000
 nReturn=0 nData="2D08 0000 0001 000C "
 nReturn=0 nData="19C5 0000 0001 "
 @@@ DSL_LINESTATE_IDLE dms 2d48 0 1 e
 nReturn=0 nData="2D48 0000 0001 "
 StatusData.nStatus=5
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 StatusData.nStatus=2
 
 in silent mode, power up PHY
 >>>>>>>>>>>Reboot on training timeout<<<<<<<<<
 DSL[00]: Reboot on training timeout (60)!!!
 DSL[00]: Autoboot State : Restart
 DSL[00]: Autoboot State : ShutDownRequest
 
  @@@ nLineState=2143 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownWait
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=2144 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=1 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownReached
 DSL[00]: Autoboot State : Restart
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=0 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : FirmwareRequest
 DSL[00]: Autoboot State : FirmwareWait
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 StatusData.nStatus=3
 
 
 DSL[00]: @@@@@@@@@@@@@ DSL_CPE_DownloadFirmware() @@@@@@@@@@@@@
 DSL[00]: nFwReqType = 3, Fw name1=NULL, name2=NULL
 DSL[00]: DSL_FW_REQUEST_VDSL in DSL_DRV_DEV_FwDownload, PortMode = SINGLE
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 0045 "
 DSL[00]: Autoboot State : firmwareReady
 StatusData.nStatus=2
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 0045 "
 DSL[00]: xtseCfg = 16_0_16_64_0_4_1_7 PTM
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 StatusData.nStatus=5
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=0 
 nReturn=0 nData="5048 0000 0001 "
 nReturn=0 nData="E843 0003 0001 0008 "
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=2
 
 in silent mode, power up PHY
 >>>>>>>>>>>Reboot on training timeout<<<<<<<<<
 DSL[00]: Reboot on training timeout (60)!!!
 DSL[00]: Autoboot State : Restart
 DSL[00]: Autoboot State : ShutDownRequest
 
  @@@ nLineState=2143 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownWait
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=2144 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=1 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownReached
 DSL[00]: Autoboot State : Restart
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=0 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : FirmwareRequest
 DSL[00]: Autoboot State : FirmwareWait
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=3
 
 
 DSL[00]: @@@@@@@@@@@@@ DSL_CPE_DownloadFirmware() @@@@@@@@@@@@@
 DSL[00]: nFwReqType = 3, Fw name1=NULL, name2=NULL
 DSL[00]: DSL_FW_REQUEST_ADSL in DSL_DRV_DEV_FwDownload
 DSL[00]: Autoboot State : firmwareReady
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 StatusData.nStatus=2
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=1 
 @@@ DSL_LINESTATE_IDLE dms 67C3 1 1 3100
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="67C3 0001 0001 "
 @@@ DSL_LINESTATE_IDLE dms 19C5 0 1 2000
 nReturn=0 nData="2D08 0000 0001 000C "
 nReturn=0 nData="19C5 0000 0001 "
 @@@ DSL_LINESTATE_IDLE dms 2d48 0 1 e
 nReturn=0 nData="2D48 0000 0001 "
 StatusData.nStatus=5
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 StatusData.nStatus=2
 
 in silent mode, power up PHY
 >>>>>>>>>>>Reboot on training timeout<<<<<<<<<
 DSL[00]: Reboot on training timeout (60)!!!
 DSL[00]: Autoboot State : Restart
 DSL[00]: Autoboot State : ShutDownRequest
 
  @@@ nLineState=2143 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownWait
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=2144 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=1 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownReached
 nReturn=0 nData="2D08 0000 0001 000E "
 DSL[00]: Autoboot State : Restart
 
  @@@ nLineState=0 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : FirmwareRequest
 DSL[00]: Autoboot State : FirmwareWait
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 StatusData.nStatus=3
 
 
 DSL[00]: @@@@@@@@@@@@@ DSL_CPE_DownloadFirmware() @@@@@@@@@@@@@
 DSL[00]: nFwReqType = 3, Fw name1=NULL, name2=NULL
 DSL[00]: DSL_FW_REQUEST_VDSL in DSL_DRV_DEV_FwDownload, PortMode = SINGLE
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 0045 "
 DSL[00]: Autoboot State : firmwareReady
 StatusData.nStatus=2
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 0045 "
 DSL[00]: xtseCfg = 16_0_16_64_0_4_1_7 PTM
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 StatusData.nStatus=5
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=0 
 nReturn=0 nData="5048 0000 0001 "
 nReturn=0 nData="E843 0003 0001 0008 "
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=2
 
 in silent mode, power up PHY
 >>>>>>>>>>>Reboot on training timeout<<<<<<<<<
 DSL[00]: Reboot on training timeout (60)!!!
 DSL[00]: Autoboot State : Restart
 DSL[00]: Autoboot State : ShutDownRequest
 
  @@@ nLineState=2143 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownWait
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=2144 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=1 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownReached
 DSL[00]: Autoboot State : Restart
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=0 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : FirmwareRequest
 DSL[00]: Autoboot State : FirmwareWait
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=3
 
 
 DSL[00]: @@@@@@@@@@@@@ DSL_CPE_DownloadFirmware() @@@@@@@@@@@@@
 DSL[00]: nFwReqType = 3, Fw name1=NULL, name2=NULL
 DSL[00]: DSL_FW_REQUEST_ADSL in DSL_DRV_DEV_FwDownload
 [nd_Tick] Tick! time 332664, ifno=1, 300 seconds is up, send one ND Router Advertisement
 [nd_SendRouterAdv] send RA (<U>,3) through IF1 ..
 [nd_Tick] ifno=1, MaxRtrAdvInterval 600, MinRtrAdvInterval 198, Next RandAdvInterval = 563 seconds
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : firmwareReady
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=2
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=1 
 @@@ DSL_LINESTATE_IDLE dms 67C3 1 1 3100
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="67C3 0001 0001 "
 @@@ DSL_LINESTATE_IDLE dms 19C5 0 1 2000
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=5
 nReturn=0 nData="19C5 0000 0001 "
 @@@ DSL_LINESTATE_IDLE dms 2d48 0 1 e
 nReturn=0 nData="2D48 0000 0001 "
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 StatusData.nStatus=2
 
 in silent mode, power up PHY
 >>>>>>>>>>>Reboot on training timeout<<<<<<<<<
 DSL[00]: Reboot on training timeout (60)!!!
 DSL[00]: Autoboot State : Restart
 DSL[00]: Autoboot State : ShutDownRequest
 
  @@@ nLineState=2143 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownWait
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=2144 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 
  @@@ nLineState=1 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 DSL[00]: Autoboot State : ShutDownReached
 nReturn=0 nData="2D08 0000 0001 000E "
 DSL[00]: Autoboot State : Restart
 
  @@@ nLineState=0 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : FirmwareRequest
 DSL[00]: Autoboot State : FirmwareWait
 nReturn=0 nData="1985 0000 0001 2000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000E "
 StatusData.nStatus=3
 
 
 DSL[00]: @@@@@@@@@@@@@ DSL_CPE_DownloadFirmware() @@@@@@@@@@@@@
 DSL[00]: nFwReqType = 3, Fw name1=NULL, name2=NULL
 DSL[00]: DSL_FW_REQUEST_VDSL in DSL_DRV_DEV_FwDownload, PortMode = SINGLE
 
  @@@ nLineState=255 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 0045 "
 DSL[00]: Autoboot State : firmwareReady
 StatusData.nStatus=2
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Init
 DSL_DRV_PM_Resume called
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 0045 "
 DSL[00]: xtseCfg = 16_0_16_64_0_4_1_7 PTM
 @@@ 1 bWaitBeforeLinkActivation=1 
 DSL[00]: Autoboot State : LinkActivateWait
 StatusData.nStatus=5
 @@@ DSL_LINESTATE_IDLE dsl_fw_loaded=0 
 nReturn=0 nData="5048 0000 0001 "
 nReturn=0 nData="E843 0003 0001 0008 "
 
  @@@ nLineState=256 
 
  @@@ dms 1985 0 1
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 
  @@@ nLineState=512 
 
  @@@ dms 1985 0 1
 DSL[00]: Autoboot State : Train
 nReturn=0 nData="1985 0000 0001 0000 "
 
  @@@ dms 2d08 0 1
 nReturn=0 nData="2D08 0000 0001 000C "
 StatusData.nStatus=2
 
 in silent mode, power up PHY